Remove and Go

Victorian Tiled Hallway Restoration Muswell Hill N10

Damaged Victorian Tiled Hallway Rescued in Muswell Hill

This client bought a house in Muswell Hill N10 with a neglected Victorian tiled floor in the hallway. They planned to completely refurbish the property including adding extensions.

Prior to starting work they called me to look at the floor and see if it was salvageable. At this time, it only had the damage where a pipe had been previously laid. However, over a year later they called me back as the building project was coming to an end and unfortunately during the process of changing the layout of the downstairs the entire final meter and a half of the hallway had been damaged and broken.

Victorian Tiled Hallway Before Restoration Muswell Hill N10 Victorian Tiled Hallway Before Restoration Muswell Hill N10

Luckily, I am used to restoration projects of this nature, so I was able to provide a quote to rescue the whole floor including rebuilding the now larger section at the end of the hallway.

The quote was revised in line with the extended work that was now required to get the floor back to its original condition and submitted for approval. It was accepted and we booked it for a few months’ later to allow all other trades to finish. However, for ease of tiling and to make a neat finish I advised them not to fit the skirting board until I had completed the work. Also, I needed time to source matching replacement tiles through various specialist suppliers before the work could start.

Repairing a Damaged Victorian Tiled Hallway in Muswell Hill

Due to the scale of the tiling work, we started with the repairs rather than the cleaning. As the hallway had been widened from its original layout, we had to cut away a little more of the original pattern so we could turn a corner in the border further back and re design. This made the pattern fit more sympathetically in the new space.

Victorian Tiled Hallway During Restoration Muswell Hill N10

Once we were finished planning everything out, we filled new concrete to the damaged subfloor paying attention to the levels so that the tiling met at even height to the new flooring in adjoining rooms.

Victorian Tiled Hallway During Restoration Muswell Hill N10 Victorian Tiled Hallway During Restoration Muswell Hill N10

Once the subfloor had set tiling could start which involved cutting and shaping a lot of replacement tiles to match the original pattern and dry fitting them into place. Once I was happy with the pattern the tiles were stuck into place and grouted. It was meticulous work, and the repair took a week to complete.

Deep Cleaning a Victorian Tiled Hallway in Muswell Hill

The floor was left to set over the weekend before returning to do a deep clean with Tile Doctor Remove and Go scrubbed into the tiles with a black pad fitted to a rotary machine. The floor was then rinsed with water and the slurry extracted with a wet vacuum. This product as its name suggests is a coatings remover and tile cleaner that does a good job of removing old sealers and dirt.

Next the floor was given an acid wash using Tile Doctor Acid Gel which was pasted onto the tiles and then scrubbed in, this time with a coarse 200-grit diamond pad. The diamond pad does a nice job of cleaning up the old tiles and the Acid Gel helps to counter any salts that may be lying dormant in the floor; salts are a common problem with floors of this age that don’t have a damp-proof membrane.

After this the floor was rinsed and wet vacuumed to remove as much moisture as possible. Once done the floor was left to dry overnight with assistance from several fans.

Sealing a Victorian Tiled Hallway

The following day work began with vacuuming dust and generally checking the tiles had dried sufficiently overnight. We know from experience it’s not a good idea to apply sealer to a damp floor as it can result in a patchy appearance.

The checks were fine and so the floor was sealed with two coats of Tile Doctor X-Tra Seal which is a fully breathable oil-based impregnator that’s ideal for old floors like this one. Impregnators work by soaking into tile, occupying the pores and thereby preventing dirt from residing there. This keeps dirt on the surface where it can be easily cleaned away.

Victorian Tiled Hallway After Restoration Muswell Hill N10

Once done the work completely transformed the hallway and really give the house back its wow factor. Only thing left to do was to fit the skirting boards.

For aftercare I recommended Tile Doctor Neutral Tile Cleaner which un-like many of the stronger products you find in supermarkets won’t impact the sealer and reduce its life.

 

Professional Restoration of a Victorian Tiled Hallway in North London

Damaged Victorian Tiled Hallway Rescued in Muswell Hill Read More »

Victorian Tiled Hallway Restoration Belsize Park

Communal Victorian Tiled Hallway Restored in Belsize Park NW3

Details below of the recent restoration of a small Victorian Tiled Hallway at a property in Belsize Park NW3. The hallway provided access to several flats and had previously been covered in carpet. The carpet has been secured to the tiles with gripper rod that had been glued to the tiles and there was a section of broken tiles in front of the staircase that had been removed leaving an obvious hole in the floor.

Victorian Tiled Hallway Before Restoration Belsize Park Victorian Tiled Hallway Before Restoration Belsize Park

I carried out a survey of the floor to determine the main issues and took numerous photographs and measurements so I could locate suitable replacements. I knew that locating replacements wouldn’t be difficult as there are a few companies that specialise in this sort of thing and I know several members of the Tile Doctor network who have built up quite a collection. Once I was armed with all the costs, I email over a quote to the managing agent which was accepted and a date scheduled for the work to start.

Repair and Cleaning of a Victorian Tiled Hallway Floor in Belsize Park

Work started by carefully removing the gripper rod and cleaning up the areas where I would need to fit replacement tiles. Tiles were then cut to fit the existing pattern and colours and dry fitted into place making small adjustments along the way until I was satisfied that I had replicated the pattern exactly. Only then were the replacements fixed into place with fresh adhesive. This type of tile restoration work is quite meticulous and the whole of the first day was spent with repairs alone.

I returned on day two to deep clean the whole floor using a strong dilution of Tile Doctor Remove and Go. This product is designed for removing old sealers but is also good at softening adhesives and other contaminates so they can be scrubbed off. I follow the recommended process of spraying the solution onto the surface and then letting it sit for ten minutes so it has time to breakdown the contaminates before being worked in with a 200-grit diamond pad. Once done it was rinsed off with water and the resultant soiling extracted with a wet vacuum.

The next step was to neutralise the floor and counter any efflorescent salts that may have built up in the tiles whilst it was covered in carpet. Old floors like these don’t have the benefit of a damp proof membrane and shouldn’t be covered as it can prevent moisture from rising through the tile and evaporating at the surface. With the carpet gone the floor can breathe again and this can lead to trapped efflorescence salts appearing. We guard against this by giving the floor an acid wash using Tile Doctor Acid Gel and then rinsing off with water and extracting as before.

Sealing a Victorian Tiled Hallway Floor

I left the floor to dry out overnight and returned on day three to apply the sealer which will protect it from dirt becoming ingrained in the tile and improve the appearance.

I used Tile Doctor X-Tra seal for this which is an oil-based sealer that’s full breathable and will allow for moisture to rise through the tiles un-impeded. The oil in the sealer has the added advantage of restoring the colours in the tiles and certainly in this case put the life back in the floor.

Victorian Tiled Hallway After Restoration Belsize Park Victorian Tiled Hallway After Restoration Belsize Park

Once done the original floor which must have been at least 100-years old was completely transformed and the tiled floor added a bit of class to the entrance to the property.

 

Professional Restoration of a Victorian Tiled Hallway in North London

Communal Victorian Tiled Hallway Restored in Belsize Park NW3 Read More »

Victorian Tiled Hallway Floor Rescued Kensal Rise

Damaged Original Classic Victorian Tiled Hallway Rescued in Kensal Rise

This classic original Black and White Victorian tiled floor was discovered by a customer in Kensal Rise under a lino floor when they moved in. Unfortunately, a large section of tiling was missing and had been backfilled with cement after a radiator pipe had been installed at some point in the past. The new owner understood that value that period features such as Victorian floors can add to the value of a property and was keen to have it restored.

Damaged Classic Victorian Tiled Hallway Before Restoration Kensal Rise Damaged Classic Victorian Tiled Hallway Before Restoration Kensal Rise

We have done numerous similar restorations in the past, so we were asked to go over, survey the floor and quote for carrying out the work. Knowing that a lot of the cement would need to be removed I started by carefully chipping away some of the cement to make sure the radiator pipe had been buried deep enough for tiling. It was so after measuring up and inspecting the rest of the floor I went ahead and issued a quote.

The client accepted so we booked in a mutually convenient date to carry out the works. The property was in a lovely street of similar properties many of which looked as if they had been restored.

Cleaning and Repairing a Victorian Tiled Hallway Floor

The first task we did was clean the existing tiles with an application of Tile Doctor Remove and Go which is a strong alkaline coatings remover. This was diluted with water, sprayed onto the tiles, left to soak in for ten minutes and then scrubbed into the floor using a black pad fitted to a rotary machine. After rinsing off and the slurry and extracting with a wet vacuum the tiles were inspected and the process repeated where needed.

Damaged Classic Victorian Tiled Hallway During Restoration Kensal Rise

The next stage was to treat the floor to an acid rinse using Tile Doctor Acid Gel, this time worked in with a coarse 200-grit pad. Old floors like this one don’t have a damp proof membrane under the floor and as the moisture rises though the tile to evaporate at the surface you can find white salt deposits being left behind. Giving the floor an acid rinse like this will dissolve the salts and will also neutralise the floor after the use of an alkaline cleaner. Combine this with a coarse pad and you find the tiles come up really well, it will even remove old grout smears on the surface of the tiles. Once done the floor was rinsed again and the floor dried as much as possible using the wet vacuum.

After leaving the floor to dry off overnight we came back the next day and started the processing of excavating the cement around the heating pipe. With the rubble removed fast drying self-levelling cement was applied to a point where it was the right height for re-tiling.

On day three with the cement now dry it was tiled using matching tiles I had managed to source from Original Style Tiles who are a supplier that specialises in reproduction Victorian tiles. They have a vast range so we can usually find a very close match. The tiles were laid in a matching diamond pattern and grouted in later that afternoon.

Damaged Classic Victorian Tiled Hallway During Restoration Kensal Rise

Sealing a Victorian Tiled Hallway Floor

On the fourth and final day, we returned to seal the entire floor with a couple of coats of Tile Doctor Colour Grow which is a matt sealer that soaks into the tile occupying the pores and thereby preventing dirt from becoming ingrained there. It also contains a colour enhancer that really brings out the contrast in the black and white tiles. It is also fully breathable so is perfect for floors of this age which lack the damp proof membrane beneath the floor that we now use in every modern build.

Damaged Classic Victorian Tiled Hallway After Restoration Kensal Rise Damaged Classic Victorian Tiled Hallway After Restoration Kensal Rise

The client was very happy with the finished result, the entrance hall was now in keeping with the rest of the period features of the property. For aftercare cleaning I recommended the use of Tile Doctor Neutral Tile Cleaner which is a gentle pH neutral tile cleaning product compatible for use on sealed tiles. Many household cleaning products tend to be very strong and can affect the sealer protecting the floor.

Damaged Classic Victorian Tiled Hallway After Restoration Kensal Rise

 

Professional Restoration of a Victorian Tiled Hallway in North London

Damaged Original Classic Victorian Tiled Hallway Rescued in Kensal Rise Read More »

Scroll to Top